600x2400x5mm EVA Foam Teak Boat Deck Mat

600x2400x5mm EVA Foam Faux Teak Boat Deck Mat Brown Decking Sheet Yacht Flooring Anti-Slip Mat Self-Adhesive Vehicle Pad
This sheet of material measures 600mm by 2400mm. It comes as a single sheet of 5mm thick non-absorbent EVA foam. If you buy a large uncut sheet, you can either use it whole or cut it to your specific needs with a sharp razor knife. Another great feature of this whole sheet is that the entire sheet is covered with pressure sensitive adhesive, allowing for easy peel and stick application. Customize the look of your boat while adding functionality. Not only does the padding look great, it's comfortable, non-slip, acts as an anti-fatigue mat, and also has sound deadening properties. This is important for anglers who don't want to scare away their next big catch. The EVA foam is designed for everyday use, can withstand the wear and tear, and is easy to clean with a stiff brush and soapy water. Use this roll with other pads to complete the look of your project!
The acrylic-based pressure-sensitive adhesive is tough and easy to apply with a peel-and-stick design, eliminating the need for fasteners. Easy to clean and stain-resistant, it also provides protection for boat surfaces, especially in high-traffic areas.
Characteristics:
-Non-slip EVA foam panels provide exceptional traction even in wet conditions.
-Unmatched comfort when standing, walking or leaning on boat surfaces
-Shock absorption that reduces fatigue
-Protection of boat surfaces from scratches, chips and dents
-Noise-dampening properties, ideal for anglers
Specification:
Material: EVA
Color: As shown
Size: 2400mm X 600mm X 5mm (94.49" X 35.43" X 0.2" )
Hardness: 50-55 degrees
Adhesive: Strong 3M adhesive on the back
Note: Size can be adjusted
Package include:
1 x Boat Decking Mat
Sheet Material Installation Instructions:
All you need for installation is a sharp razor blade, masking tape, window cleaner and a clean cloth.
Thoroughly clean the area where the mat will be applied. We recommend using a cleaner that does not leave residue. A glass cleaner used with a clean cloth or a Scotch Bright pad works well. Make sure the area is completely dry before applying the pad.
If there is glue, grease, adhesive or other substances on the surface where the pads are to be applied, these can be removed with methylated spirits and then acetone. Be sure to use a glass cleaner afterwards as suggested above. Again, the surface of the platform must be completely dry before applying the pad.
When installing pads on a new boat straight from the factory, it is very important that all mold residue is thoroughly removed from the boat's surface. Be sure to check with the boat manufacturer before installing pads. Install the pads exactly where you want them covered and check for proper fit and placement. Once you are sure the pad is the right size and you are happy with the position, flip the pad over so the paper backing is facing up. Using a sharp razor knife, carefully cut the paper backing down the middle, being careful not to cut into the pad. Starting from the middle, pull up each side a little to make sure the backing is cut all the way through.
Flip the pad back over and position it exactly where you want to attach it. Secure one side of the pad firmly to the platform with two inches of tape.
Now lift the unattached side of the pad with one hand and use the other hand to release the paper backing. This process is a little easier if you have someone to help you. Slowly and carefully pull the rest of the backing material up as you attach the pad to the platform. Use your hand to apply pressure to the pad to ensure a firm bond between the pad and the platform. Now remove the tape from the other side of the pad and repeat the attachment process as you did on the first side. Take the time to press the entire pad into place with your hands, especially around the edges of the pad.
A notice:
1.Please allow 1-5mm error due to manual measurement.
Please make sure you do not mind before bidding.
2.The colors may be different because of the difference display, please understand.
*** Translated with www.DeepL.com/Translator (free version) ***